Bathroom Barnwood Shelf DIY

Our barn wood bathroom shelf may be our most asked about project, so we are excited to finally share all of the details with you!

Before we get to the step by step instructions, we wanted to share our inspiration for this shelf. After updating our vanity mirrors to something more modern, we knew we wanted to warm up the space by adding a natural wood element and what better way than to include something that is both beautiful and practical.

Step by Step :


01 // Choose your piece of wood for the space. It needs to be at least 6″ wide since you will be running it through a table saw long way to give you your support board and your shelf. We chose an antique piece of barn wood from a local salvage yard. If you decide to use an old wood board like we did, be sure it has been treated/fumigated to ensure there are no bugs.

02 // 2 1/2″ Construction Screws. We chose gold screws instead of silver since you will see them. We drilled the construction screws into our wall studs for more support, but you can always use anchors if you do not want to/ or can not drill into your studs. 50lb Dry Wall Anchors are what we use when we cannot drill directly into our studs.


01 // Give your board a nice sanding just to remove any splinters or rough areas. Run your board through a table saw which will split your board in to two pieces giving you your shelf and support boards. Note : Our shelf is approximately 3 1/2″ wide and our support board is 1 3/4″ wide.

02 // Find your studs in the wall and mark them with a pencil. Typically studs are about 16″ apart. See above if you cannot drill in to your studs.

03 // After you have found and marked where your studs are, you can assemble the shelf by attaching the shelf and support boards together. This part is helpful to have two people- one who can hold the two pieces together while the other screws one board down into the other.

04 // Your boards will have two fresh cut edges from the table saw. When assembling the shelf together, make sure your shelf board cut edge will be facing the wall, and your support board cut edge will be facing up touching the shelf board underneath.

05 // Screw the boards together. Our shelf is 50″ long, and we used 3 screws spaced out evenly to assemble the shelf together. Note : If you are using an old piece of wood, like we did, for an easier assembly, drill pilot holes into the shelf board first.

06 // After you have assembled the shelf, hold it up on the wall so you can mark the support board where your studs are.

07 // Drill pilot holes into the support board. Drill your screws directly through the pilot holes in the support board into the wall studs. Remember, if you are using anchors instead of screwing in to your studs, you will need to screw the anchors into the wall before drilling through your support board into the wall.

Here, you can see the gold screw in the support board that was drilled into the stud.

We use our shelf everyday and absolutely love the form and function of it.

As always, if you have any questions, you can ask us in the comments below!

Shop this post :

Add a comment...

Your email is never published or shared. Required fields are marked *

We are Justin & Chelsi, the creators of Laine & Layne. Here you will find things that inspire us as well as projects as we continue to update our modern cottage.hello & welcome

Popular Posts

blog courtesy

Unless otherwise noted, all content on our blog is original and created by us, Laine & Layne. You will notice affiliate links being used or sponsored content may appear, however, we promise to always be clear and express authentic opinions. You can read more about our privacy policy and affiliate disclosure, here.

Husband and Wife team dedicated to

creating inspiration for a neutral home.

sign up

for our weekly newsletter & exciting announcements!


Form submitted successfully, thank you.Error submitting form, please try again.